Regulator Solar MPPT 100/30D 30A

Regulator Solar MPPT 100/30D 30A

The MPPT 100 / 30D regulator has a capacity of 30A for solar powered heating. The controller will automatically adjust to the nominal battery voltage of 12 or 24V. Presenting a maximum ultra-fast power bridge (MPPT), especially with these clouds, when the intensity of the light is continuously low, an ultra-fast MPPT controller will reduce the energy capture at 30% compared to the controllers. PWM charge is 10% compared to MPPT controllers but slow.

It is also a maximum power detection bridge advanced in the case of partial darkness, it is possible to detect partial darkness, but the maximum power bridges may be present on the power voltage curve. Ideal for using 60-cell solar panels when installing insulated solar panels, as well as using 24-volt solar panels for 12-volt installations in motorhomes and boats.

Product Features

- Battery Voltage Automatic Selection: 12/24V
- Nominal Charging Current: 30A
- Maximum Open Circuit Voltage (PV): 100V

- Maximum Efficiency: 98%
- Natural Convection Cooling

- Self-Consumption: 20 mA
- Ultra-fast Maximum Power Point Tracking (MPPT)

- Flexible Charging Algorithm: Features 8 pre-programmed algorithms

- Features: Protection against over-temperature, reverse polarity, short circuit, overload, etc.

- Nominal System Voltage: Automatic detection of 12V, 24V

- Charging Voltage "Absorption" Standard Values: 14.4V / 28.8V (adjustable)

- Charging Voltage Equalization: Standard Setting: 16.2V / 32.4V (adjustable)

- 'Floating' charging voltage: Default setting: 13.8V / 27.6V (adjustable).