Innova 2.0 reversible monobloc air conditioner without outdoor unit

10 HP-DC or 12 10 HP-DC Inverter reversible  air conditioner without outdoor

The one-piece wall-mounted reversible air-conditioning solution without external unit for individual dwellings in the city center, protected historical buildings, hotel offices, etc. 
Class A + 

A reversible heat pump with dual function: Winter heating and cooling Summer 

The wall-mounted reversible monoblock wall-mounted air conditioner "2.0" only needs 2 pipes (diameter 160 mm) to the outside.

2.0 DC Inverter, the best of technology, now in class A +

Model Power of choice see drop-down menu

10 HP-DC Inverter or 12 HP-DC Inverter 

INNOVA improves the inverter technology by offering the best in terms of acoustic comfort (sound level) and performance: 
reduction of consumption and maintenance of the best level of ambient temperature and humidity. 
The use of a brand new BLDC (brushless direct current) Inverter control completely eliminated the vibrations and reduced the sound level to exceptional values. 
Both motors are BLDC direct current to further reduce power consumption and adjust the flow more accurately. 
The energy consumption is extremely low thanks to the absorbed values ​​which, in the case of a partial load, ofless than 300 W. At a nominal cooling power of 2.35 kW, "2.0" has a coefficient of efficiency (EER) of 3.22, which gives the energy efficiency class "A +" , the best in the category of fixed installation monobloc air conditioners. 

Automatic outdoor grilles
"2.0" has automatic opening / closing grilles activated by the inlet and outlet airflow: 
they open when the appliance is on and close when the appliance is switched off. Thus, 2.0 offers better indoor comfort with less dust entry, less noise and pollution. The visibility outside is even 
smaller. 


The "2.0" can be easily fixed in the high or low wall position.

A simple push of a button adjusts the direction of the airflow. 

Novelty the "2.0" recovers the heat of the air extracted from the local (in summer, the function is reversed). 
This function, activated by remote control, increases the average performance of the unit. 

Remote and device control In
addition to the remote control, all functions can be managed by the control panel directly on the device, a "lock" function is then available to prevent changes to the parameters. Function
"Heating" can be disabled for "cold only" operation, the use of a condensate drain pipe is not necessary. The orientation of the air outlet flap, upward or downward, can 
be programmed with a single touch on the control panel.

Technical Data:

Installation Manual:

User manual: