100W Solar LED Street Lamp + Remote Control

Specifications of 100W Solar LED Street Light + Remote Control

EAN 8435568982840
Power 100W
Opening angle 180º
CRI >75
Interior-exterior Exterior
IP protection IP67
Sensors Motion sensor (PIR)
A+++ energy label
Others Rechargeable battery Solar charging All-inclusive kit
Product dimensions 150x570x45mm
Packaging dimensions 16x58x5cm
Packaging weight 3Kg
CE RoHS ECORAEE certificates

Description of  100W Solar LED Street Light + Remote Control

LED solar street lights have great advantages over conventional lamps as they do not require cable channels, they are self-supporting and integrate all the components in a single piece. It incorporates a PIR motion sensor to offer maximum power in case of activity and lower the lighting when it does not detect movement, optimizing the accumulated energy so that light is guaranteed throughout the night.

The solar street light incorporates the following advantages:

- Energy saving.
- Incorporates the most advanced LED technology
- Efficient and high-quality light emission (Color rendering index, CRI>75).
- Savings in time and installation costs.
- Savings in maintenance costs.
- No need for external power supply.
- Makes use of clean and renewable energy.
- Reduces light pollution.
- The materials used are completely recyclable.
- Fully integrated system that offers architectural advantages.
- Easy installation.

Functioning:
- During daylight hours the system captures solar energy and stores it in its batteries in the form of electrical energy.
- At dusk, the control system automatically turns on the LED module using the stored energy, providing the necessary light to the space to be illuminated. It is possible to program it to provide 100% brightness (for 2-4H), 70% brightness (for 4-7H) and 40% brightness (for 6-10H)
- When dawn breaks, the LED module automatically deactivates, starting a new cycle.
- The Solar Street Light is made up of a luminaire that contains all the electrical components inside, so the pole does not need a registration door and does not house copper cables inside.

Remote control:

- OFF button: Turns off the solar street light.

- INDUCTION button: Connects the motion sensor. The streetlight turns on automatically at dusk at minimum power and when it detects movement it offers maximum brightness and returns to minimum power after approximately 30 seconds. You can use manual mode at any time if the motion detector does not meet your needs.

- 2H button: Offers maximum brightness for 2-4 hours, depending on the battery charge.

- 4H button: Offers 70% brightness for 4-7 hours, depending on the battery charge.

- 6H button: Offers 40% brightness for 6-10 hours, depending on the battery charge.

The solar street light has an activity LED that makes it easy to know the status in which it is:

- Green color: Charging mode or Manual mode
- Red color: AUTO mode

- Illuminates an area of approximately 100 m2

Components:
- Epistar Led Chip. It uses the most advanced LED technology, achieving high performance with high quality of light.
- ABS plastic luminaire body
- Lithium battery with a charging time of 8-10 hours in sunny hours and discharge up to 5 hours in maximum lighting and up to 12 hours with minimum lighting.
- Optical system, allows the light beam to be focused towards the space to be illuminated, avoiding light pollution.
- Maximum efficiency multi-crystalline photovoltaic solar panel, captures solar radiation, converting it into clean electrical energy.
- Lithium electrical storage batteries that store the energy captured by the solar panel during sunny hours so that it can be used during night periods.

- Incorporates a switch to turn off the streetlight in cases of prolonged inactivity.

- Lithium battery 3.7V / 2400mAH

- 5V/4.5W high efficiency solar panel