Victron BMV-700 series battery monitor

By buying this product you can collect up to 42 loyalty points. Your cart will total 42 loyalty points that can be converted into a voucher of 8,40 €.


New product

The Victron - BMV-700 Series solar battery monitors allow you to calculate the amp-hours consumption and the battery charge level.

Available for delivery from 3 to 4 days

169,40 €

Victron battery monitor BMV-700 series  
solar battery monitor victron - Series BMV-700 allows you to calculate the ampere-hour consumption and the level of battery charge.  

"Victron Solar Battery Controller High Precision"

Victron  high-precision solar battery controller "  The    Victron BMV-700 series battery monitors allow you to calculate the amp-hours consumption and the battery charge level. The consumption is calculated by the current flow that enters and leaves the battery. The algorithms programmed in the microprocessor allow to control with precision the consumption of the batteries. 

Description

Standard information and alarms

  •     State of charge (%).
  •     Ampere-hour consumption (Ah).
  •     Battery voltage (V).
  •     Charge / discharge current of the battery (A).
  •     Prediction of autonomy according to consumption.
  •     Visual and audible alarm: overvoltage and undervoltage, and / or battery charge status.


    Programmable alarm

The BMV-702: has an additional input that can be programmed to measure:

  •     the voltage (of a second battery),
  •     temperature
  •     the average tension


The BMV 700HS: Voltage range of 60 to 385 VDC  
Adapter ("precleaner") not required.  suitable for systems with negative grounding only (non-isolated {shunt} battery driver).  

Low cost ultra low cost controller

  •     The highest resolution: 10 mA (0.01 A) with 500 A derivation
  •     It can be used with branches of 50, 60 or 100 mV at currents of 100 to 1000 A.
  •     Lowest current consumption: 4 mA at 12 V and 3 mA at 24 V.
  •     Easy to connect: supplied with shunt, 10 meters of UTP RJ 12 cable and with fuse cable for "+" connection.
  •     Very simple installation: separate front cover for the rounded part;  Rear mounting ring and front mounting screw.
  •     Wide range of supply voltage: 9.5 - 95 VDC range without adapter (60-385 VDC for BMV-702HS)
  •     Communication port (an isolated RS232 interface is required for connection to a computer)

Technical characteristics

Data sheet :

No customer reviews for the moment.

Write a review

Victron BMV-700 series battery monitor

Victron BMV-700 series battery monitor

The Victron - BMV-700 Series solar battery monitors allow you to calculate the amp-hours consumption and the battery charge level.

Available for delivery from 3 to 4 days