FlatFix flat roof mounting system for panels from 105 to 115 cm wide

Lightweight and flexible mounting system for solar panels

FlatFix Fusion is used for fixing solar panels on a flat roof. Lightweight, the structure allows the custom-made panels to be mounted in order to obtain an optimal solution for any flat roof. 
The system is designed for quick and easy assembly using few components. The main components are connected to each other by means of notches of interlocking joints. You only need a tool to mount the solar panels. This significantly reduces installation time without compromising quality!

>> Cabling management:

In order to reduce the potential risk of interference in panel wiring, the structure incorporates a cable management system. It also prevents them from lying on the floor

 Suitable for almost all flat roofs. 

The placement is fast and easy, with a minimum of ballast. What makes this system unique is its flexibility: the same parts can be used to build a conventional installation to the south, for East-West or North-South exposure. 
With its 13 degree tilt angle, the PV system will perform well in just about any direction.

>> Requires little ballast!

Flatfix Fusion is a lightweight structure and requires little ballasting at strategic points. This will not add too much extra load to a roof.

Thermal integrity and robustness

The system components are connected to each other by fixed parts with self-clicking interlocking. The system is designed so that the thermal effects of the building are not transmitted to the panels and vice versa. This will prevent damage to the panels or the integrity of the roof.

>> Transport and handling

The components of the fastening system are assembled by means of self-locking junction pieces. The system consists of a small number of parts and requires very little material, which makes it simple to transport, handle but also mount.

How to choose a system adapted to my panels

Choosing the correct mounting system for your panels is easy: just select the number of panels per row you want in the options.

If you want a 2nd row: you need to add a second mounting system to your basket.

>> Accessories are also available at the bottom of the product: wind deflectors and ballast rack.

Video: Installing a FlatFix System

THE BASIC PIECES:

The basic parts of the FlatFix system allow you to mount your panels on a structure. 

COMPLEMENTARY PRODUCTS IN BASE KIT (not included): see accessories back to top