Survivalist solar kit 30Wc-

"Survivalist solar kit 30Wc"

Kit Composition:
1x 12V MX FLEX Protect 30Wp Back Contact solar panel
1x 12V 35Ah Ultracell GEL battery
1x Victron Phoenix VE. Direct 12V / 24V / 48V - 250VA
1x Solar cable 2X4mm² with Type MC4 (sold by the meter -5m)
1x Battery cable 2x4mm² - 2m

Thanks to its integrated battery, you have power even outside the hours of sunshine. Its inverter transforms the direct current from the battery in order to supply consumers on a 230V socket. Its pre-wired box allows you to be ready to supply your consumers just a few minutes after your arrival on site.

 COMPOSITION

Solar panel MX FLEX 30Wp 12V

Flexible and really light, they resist very well to saline, humid environments, bad weather and even trampling!

The MXFLEX panels will adapt perfectly and simply to all the places where you want to place them.

The waterproof junction box attached to the front of the panel and its MC4 connectors will allow you to connect it easily and simply.

Thanks to their very high efficiency Back Contact SUNPOWER monocrystalline cells, sunpower MX FLEX panels have the best in photovoltaic technology!

 Characteristics

 

35 amp
gel batteries Gel batteries are sealed batteries: no maintenance, no addition of distilled water. Reinforced safety compared to open lead batteries.
A gel battery can withstand 100% discharge and regain its rated capacity if the discharged holding time is short. This series has a longer discharge time compared to other batteries. Its special plate design increases battery life and especially in warmer temperatures. A separator within the battery improves its performance. It also has a longer shelf life.

Characteristics :

Nominal voltage: 12 V
Capacity: 35 Ah
Dimensions: L 195 x W 130 x H 180 mm
Weight: 11.2 K

 

 

Epever LS1012EU PWM 12V/24V regulator with USB output

     System voltage configuration: 12V/24V automatic
    High efficiency PWM charging with temperature compensation
    2 LEDs that indicate charging status and battery status
    Outdoor temperature sensor interface
    Bus RS-485 communication
    function Software update function
    USB output for charging e.g. mobile phone, fan or other electrical device.

Characteristics

	LS1024EU
Rated system voltage	12/24VDC
Battery rated current	10A
Maximum PV input voltage	50V
Self-consumption	≤6mA
Temperature compensated	-5mV/℃/2V (ref)
Charging voltage equalization	Freeze: / , Sealed: 14.6V, Open: 14.8V
Increase in charging voltage	Freeze: 14.2V, Sealed: 14.4V, Open: 14.6V
Float charge voltage	Freeze / Sealed / Open: 13.8V
Reconnect voltage	Freeze / Sealed / Open: 12.6V
disconnection voltage	Freeze / Sealed / Open: 11.1V
Dimensions	120.3x67x21.8mm
Mounting holes	111.5mm
Terminal	4.5mm2
Weight	0.10kg
Operating temperature	-35?~+55?
Storage temperature	-35?~+80?
Humidity	?95% (NC)
Standard	IP320

 

 

 

Victron 12V / 24V / 48V - 250VA

Developed for professional use, the range of Phoenix converters is perfectly suited to the most diverse applications.

Fully configurable

• Reset and alarm levels for low battery voltage
• Restart and shutdown levels for low battery
voltage • Output voltage 210 -245V
• Output frequency 50Hz or 60Hz
• Detection level ECO mode and ECO mode on/off

 

 3 m of 2X4mm2 solar cable and 2m of 4mm² battery cable

 MC4 crimped on cable

Long service life

Thanks to the double sheath, these cables are extremely resistant to UV, heat, cold and bad weather.