New PROFLEX GRAY, waterproof glue

PROFLEX GRAY, waterproof glue

By buying this product you can collect up to 1 loyalty point. Your cart will total 1 loyalty point that can be converted into a voucher of 0,20 €.


PROFLG

New product


gray PROFLEX waterproof glue gray color to repair under water, to glue everything

25,85 €

PROFLEX GRAY, waterproof glue

gray PROFLEX waterproof glue gray color to repair under water, to glue everything

Sealing adhesive in wet environment. FOOD quality AFNOR standards. Easy to apply, it is a simple cartridge to place in a gun. The glue is smooth on the finger or spatula. Adheres to all surfaces (wood, steel, copper, brass, aluminum, PVC, plastic, brick, concrete, stone, marble, glass, polyester, polystyrene, canvas etc.) without solvent or silicone UV resistant, mold, fungicide and without smell


With PROFLEX, you can repair any object used in a humid environment! faucet leaks for example! NO MORE LEAKS. Examples:

    - connection of pipes of different diameters (join a 15mm pipe to a 19mm pipe for example)

    - repair a rain barrel that has split in winter following frost

    - possibly redone a perfectly sealed seal for shower or sink (delicate to achieve)

    - seal an outdoor shower pipe

    - stick the hoses of a pool pump

    - repair the punctured liner

    - etc ...

TECHNICAL CHARACTERISTICS :
Base: Polyoxypropylene Polymers Polymerizing with Air Moisture and Substrates
Dry extract: Greater than 99%, a maximum weight loss of about 1%
Consistency: Excellent thixotropy and quite good extrusionability (about 200 g / min at 2 bar, nozzle diameter 6 mm)
Density: About 1.40 g / cm3
Polymerization rate: Skin formation: approx. 10 minutes (DIN 50 014), approx. 4 mm / 24h on the first day
Shore A hardness: About 51 according to DIN 53 505
Elongation at break: About 500% according to DIN 53 505
Resistance to fracture: About 3.3 to 3.5 MPa (N / mm²) according to DIN 53 504 Stereophy S 3a
Tear resistance: About 22.5 N / mm according to ASTM 624 D

form B
Characteristic of the film: Elastic and very resistant, good resistance to moisture and temperature from -40 to + 90 ° C continuously, + 110 ° C peak. Possibility of painting fresh cords during the first hours after application. Almost non-yellowing putty during Ultra Violet exposures. Formula free of solvents, silicones, halogens and isocyanates very advantageous from the ecological and toxicological point of view. Odorless product. Boiling temperature: +5 to + 35 ° C Cleaning: Use a dry cloth.

No customer reviews for the moment.

Write a review

PROFLEX GRAY, waterproof glue

PROFLEX GRAY, waterproof glue


gray PROFLEX waterproof glue gray color to repair under water, to glue everything