MPPT Victron BlueSolar 150/35

By buying this product you can collect up to 18 loyalty points. Your cart will total 18 loyalty points that can be converted into a voucher of 3,60 €.


MPPT 150/35

New product

Victron BlueSolar MPPT charge controllers 12V / 24V / 48V: 150/35

363,00 €

MPPT Victron BlueSolar 150/35

Victron BlueSolar MPPT charge controllers 12V / 24V / 48V: 150/35.

 MPPT solar controllers, more efficient than PWM, will optimize the voltage of the solar panels to maximize the power obtained.

 BlueSolar charge controllers can charge a lower nominal voltage battery from a higher rated PV array field. The controllers will automatically adapt to a nominal battery voltage of 12, 24, 36 or 48 V. 

Super fast location of the maximum power point (MPPT) - Maximum Power Point Tracking.

Especially in case of cloudy skies, when light intensity is constantly changing, a high speed controller {MPPT} will improve energy harvesting by up to 30% compared to {PWM} charge controllers ), and up to 10% compared to slower {MPPT} controllers. 

Advanced Peak Power Point Detection Under Shady Conditions
Under shady conditions, two or more peak power points may be present on the voltage-power curve. Conventional MPPTs tend to hang on a local MPP, which may not be the optimal MPP. The innovative algorithm of BlueSolar will always maximize energy recovery by blocking on the optimal MPP.

No fan. Maximum efficiency exceeding 98%. Total output current up to 40 ° C (104 ° F). 

Flexible Load Algorithm
Eight preprogrammed algorithms, selectable with a rotary switch (see manual for more details).  

Extended electronic protection 

Protection against overheating and reduction of power supply in case of high temperature. Protection against reverse polarity PV and PV short-circuits. Protection against PV current reversal. 

 Internal temperature sensor

 It compensates the absorption load and float voltages according to the temperature. 

VE.Direct Bluetooth Smart Dongle

Technical characteristics

BlueSolar Charge Controller  MPPT 150/35
Battery voltage (Automatic selection)12/24/36/48 V
Maximum battery current 35A
Maximum power PV, 12 V 500W
Maximum power PV, 24V 1000W
Peak power, 36V 1500W
Maximum power PV, 48V 2000W
Maximum open circuit PV voltage 150V
Peak efficiency 98%
Internal consumption 0,01mA
"Absorption" load voltage 
14.4 / 28.8 / 43.2 / 57.6
Load float voltage 13.8 / 27.6 / 41.4 / 55.2 V
Load algorithm adaptive multi-step 
Temperature compensation -16mV / ° C resp. -32mV / ° C 
ProtectionBattery polarity inversion (fuse) Short circuit output - Overheating 
Operating temperature -30 to + 60 ° C (rated output power up to 40 ° C) 
Humidity (without condensation)95%
Data communication port VE.Direct 
Housing 
Color Blue 
Power terminals 13 mm² / AWG6 
Degree of protection IP43, IP22
Weight 1.25 kg 
Dimensions (HxWxD) 130x186x70 mm 

 

No customer reviews for the moment.

Write a review

MPPT Victron BlueSolar 150/35

MPPT Victron BlueSolar 150/35

Victron BlueSolar MPPT charge controllers 12V / 24V / 48V: 150/35