SOLAR REGULATOR SRNE MPPT 12/24V 20A

By buying this product you can collect up to 3 loyalty points. Your cart will total 3 loyalty points that can be converted into a voucher of 0,60 €.


- MC2420N10

New product

Using PowerCatcher MPPT technology, the MC Series solar charge controller provides maximum energy tracking for solar panels. 

78,90 €

srne mppt

Using PowerCatcher MPPT technology, the MC Series solar charge controller provides maximum energy tracking for solar panels.
This technology allows the controller to quickly and accurately track the maximum power point of a photovoltaic installation in any environment, to obtain the maximum production from a solar panel in real time and to significantly increase the efficiency of using energy from the solar system.

Its advantages

♦ PowerCatcher technology, maximum power point tracking, allows the controller to track the maximum power point of solar panels even in complex environment. Compared with traditional MPPT tracking technology, it has faster response speed and higher tracking efficiency.

◆ A built-in MPPT (Maximum Power Point Tracking) algorithm greatly increases the energy utilization efficiency of the photovoltaic system, which is about 15%-20% higher than traditional PWM charging.

◆ It offers an active regulation function of the charging voltage. When the battery is open circuit or the BMS lithium battery overcharge protection is activated, the battery terminal of the controller outputs the nominal value of the charging voltage.

◆ MPPT tracking efficiency is 99.9%.

◆ Using advanced digital power technology, the circuit's energy conversion efficiency can reach 98%.

◆ Available for several battery types. It supports charging procedures for different types of batteries such as lithium batteries, colloidal batteries, sealed batteries, vented batteries, etc.

◆ A current-limited charging mode is available. When the power of the solar panel is too large and the charging current is higher than the rated power of the valve, the controller will automatically reduce the charging power so that the solar panel can work with the rated charging current.

◆ Support automatic identification of lead-acid battery voltage.

◆ It is possible to connect an external LCD screen or a Bluetooth module to visualize the operating data and the state of the equipment, and the modification of the parameters of the controller is possible.

◆ Standard Modbus protocol support to meet communication needs in different occasions.

◆ A built-in overheating protection mechanism ensures that when the temperature exceeds the device's set value, the charging current decreases linearly with the temperature.

Features

Items

Setting

Model

MC2420N10

System voltage

12/24V

Zero head loss

<10mA

Battery voltage

9V-32V

Maximum open circuit PV voltage

92V(25°C); 100V (Lowest ambient temperature)

Maximum power point voltage range

20A

Rated load current

260W/12V 520W/24V

Maximum PV input power

</= 98%

Load conversion efficiency

>99%

Temperature compensation coefficient

-3mv/°C/2V (default); Lithium battery without temperature compensation

Operating temperature

-35°C / +60°C

IP Rating

IP32

Device weight

600g

Mode of communication

TTL serial communication

Altitude

</= 3000m

Dimensions (mm)

150*105.6*61.5

Technical characteristics

Charging power20A
Voltage12V/24V
MPPT/PWMMPPT
Weight0.6kg
Width150mm
Height105.6mm
Thickness61.5mm

No customer reviews for the moment.

Write a review

SOLAR REGULATOR SRNE MPPT 12/24V 20A

SOLAR REGULATOR SRNE MPPT 12/24V 20A

Using PowerCatcher MPPT technology, the MC Series solar charge controller provides maximum energy tracking for solar panels.