260Wc - 12V Motorhome kit - configurable

"Recharge the batteries of your camper, caravan, boat ..."

complete kit of 255Wc for camper with polycrystalline solar panel. 
The panel and battery wiring is 4mm² double insulated so as to guarantee a charge without any losses. 
Charging the battery in 3 steps ensuring an extremely clean charge of the battery.

COMPOSITION

1x polycrystalline BenQ solar panel 260Wc

BenQ 260Wc Photovoltaic Module is a solar panel composed of 60 silicon cells {polycrystalline} in high yield.

Rated power: 260Wc

• Gray anodized aluminum frame
• high transparency and anti-reflective solar glass (tempered) 3.2 mm
• IP67 junction box: high level of waterproofness and dust
• Resistance to corrosion and humidity (Module according to IEC 61701)
• Module weight: 18,5kg

LS2024B-20A Charge Controller

• Capacity: 20 amperes.
• Voltage: 12v or 24V
• This controller can accommodate up to 240 watts of solar panels (in a 24V system)
• Temperature compensation 
• 2 years warranty.
• Technology: PWM.

Get the most out of your controller by using the optional remote display 
- Graphical display of the battery charge status

 Available as an option:

MPPT regulator 20A + 124,6 €

Wiring and connectivity

The kit is equipped with a special 4mm² double insulation solar cable. This important section ensures that it does not heat up even in case of big production, it is thus certain to have an optimal charge of the battery by minimizing losses to the maximum. 

5 m of cable with mc4 connectors crimped on the cable are provided to connect the panel to the charge controller. The MC4 connectors guarantee a perfectly tight connection between the panel and the cable, and also make it possible to remove it very easily   

2m battery cable with crimped battery lug are also provided.

For Connector MC4 double male + femaleconnecting your panels in parallel

Motorhome roof pass

Vehicle fasteners

 

8 corners of attachments to install a solar panel on the roof of a motorhome,  The corners are stuck on the roof of the camper with the glue provided and the panel is screwed on them.  The panels are raised a few centimeters, which allows a good ventilation of these and minimize the losses due to high temperatures.

TECHNICAL CHARACTERISTICS