Motorhome solar kit, boat 12V 200Wc

Autonomous solar kit intended to be on motorhomes or any vehicle, where it is just necessary to recharge batteries

2X Solar panel: 100Wc
solar cable 2X4mm² 5m
battery cable 2X4mm² 2m
Type MC4 crimped on the cable
Solar regulator SRNE MPPT 12/24V 20A
Fixings: Mounting glue and fixing corners

" 2 panels of 100Wc, motorhome, caravan, boat..."

complete 200Wc kit for motorhome with solar panel, cells guaranteed for 20 years.
The panel and battery wiring is 4mm² double insulation to guarantee a charge without any losses. 
Charging the battery in 3 stages ensuring an extremely clean charge of the battery.

2x100Wp 12V monocrystalline solar panels   Normal operating temperature NOCT: 45°C Wind resistance: ?130 km/h Maximum hailstone diameter: 25 mm Hailstone impact speed: 80 km/h Lightweight and reinforced anodized aluminum frame High transmissivity of glass “Plug & play” box with 2 diodes 4mm thick safety glass

The reduced dimensions of this panel (54cm by 121cm) and its weight make it an ideal companion for mobile applications (camping, boating, etc.).

Features

Solar regulator SRNE MPPT 12/24V 20A

Wiring and connectors

The kit is equipped with special 4mm² double insulated solar cables. This important section guarantees that it does not heat up even in the event of large production, we are thus certain to have an optimal charge of the battery by minimizing the losses to the maximum.

5 m of cable with mc4 type connectors crimped on the cable are provided to connect the panel to the charge controller. The MC4 type connectors guarantee a perfectly sealed connection between the panel and the cable, and also allow it to be removed very easily  

. 2m of battery cable with crimped battery terminal are also provided.

Double male + female MC4 type connector

To connect your panels in parallel

8 fixing corners to install a solar panel on the roof of a motorhome,

The corners are glued to the roof of the motorhome with the glue supplied and the panel is screwed onto these.

The panels are raised a few centimeters, which allows good ventilation and minimizes losses due to high temperatures.

More functions with the MT50 display 

Choice of different 12/24V output control modes:

Manual ON/OFF,
Light ON/OFF, 
Light ON + Timer, 
Schedule only

Selection of battery type and capacity
All charging voltages can be changed

Real-time monitoring of the entire installation

TECHNICAL CHARACTERISTICS