Phoenix VE.Direct 12/24/48 250VA.

By buying this product you can collect up to 6 loyalty points. Your cart will total 6 loyalty points that can be converted into a voucher of 1,20 €.


New product

Phoenix Converter VE.Direct 12/24/48 250VA.

Developed for professional use, the range of Phoenix converters is perfectly adapted to the most diverse applications.

116,20 €


Phoenix Converter VE.Direct 12/24/48 250VA.

VE.Direct communication port


The VE.Direct port can be connected to:

• A computer (VE.Direct-USB interface cable required).

• Apple and Android smartphones, tablets, macbooks and other devices (a Bluetooth Smart dongle communicating with VE.Direct is required).

Fully configurable:

• Reset levels and alarm triggering in case of low battery voltage

• Restart and shutdown levels in case of low battery voltage

• Output voltage 210 -245V

• Output frequency 50Hz or 60Hz

• ECO mode detection level and ECO mode on / off

monitoring:

• Current and voltage alarms, input and output

Recognized reliability

The complete bridge topology with a toroidal transformer has proved its reliability for years. The converters are protected against short circuits and overheating, whether in case of overload or high ambient temperature.

Strong starting power

Required to start loads such as power converters for LED bulbs, halogen bulbs or power tools.

ECO mode


In ECO mode, the inverter will switch to pause if the load drops below a predetermined value. Once paused, the converter will turn on for a short period of time (adjustable, default: every 2.5 seconds). If the load exceeds a preconfigured level, the converter will remain on.

On / off remote.


A remote start / stop switch can be connected to a two-pole connector or between the positive pole of the battery and the left contact of the two-pole connector.

LED diagnostics


Please refer to the manual for a description.

To transfer the load to another AC source: the automatic transfer switch


For our low power converters, we recommend the use of our Filax automatic transfer switch. The Filax has a very fast transfer time (less than 20milliseconds) so that computers and other electronic equipment can continue to operate without interruption.

Technical characteristics

Phoenix converter 12/250 24/250 48/250 
AC power of the converter at 25 ° C (VA) (3)250
Converter power at 25 ° C / 40 ° C (W)200/175
Peak power (W)400
AC Output Voltage / Frequency (4)230 V AC ± 3% 50 Hz or 60 Hz ± 0.1%
Input voltage range (V DC)9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0 V
Low battery alarm (V DC)10.9 / 21.8 / 43.6
Low battery shutdown (V DC)9.3 / 18.6 / 37.2 V
Battery charge detection (adjustable)14.0 / 28.0 / 56.0 V
Maximum efficiency 12/24/48 V (%)87/88/88%
Vacuum consumption4.2 / 5.2 / 7.9W
Default vacuum consumption in ECO mode (default retry interval: 2.5 s, adjustable)0.8 / 1.3 / 2.5W
Power setting start and stop in ECO modeAdjustable
Operating temperature-40 to + 65 ° C (fan cooling) (1.25% reduction per ° C above 25 ° C)
Humidity (without condensation)max 95%
Housing
Material and colorSteel frame and plastic cover (Blue RAL 5012)
Battery connectionScrew terminal
Standard AC socketsSchuko (CEE 7/4), IEC-320 (plug included) UK (BS 1363), AU / NZ (AS / NZS 3112)
Remote on / off switch

Yes

Degree of protectionIP 21
Weight kg2.4
Dimensions (HxWxD in mm)86x165x260
securityEN / IEC 60335-1 / EN / IEC 62109-1
Emission / ImmunityEN 55014-1 / EN 55014-2 / ​​IEC 61000-6-1 / IEC 61000-6-3

TECHNICAL SHEETS & DOCUMENTS

No customer reviews for the moment.

Write a review

Phoenix VE.Direct 12/24/48 250VA.

Phoenix VE.Direct 12/24/48 250VA.

Phoenix Converter VE.Direct 12/24/48 250VA.

Developed for professional use, the range of Phoenix converters is perfectly adapted to the most diverse applications.

49,95 €
0 Review(s)
For MPPT Battery Charger Controller you can display your BMV or MPPT information on iOS and Android,