Solar Kit 20Wc - 26Ah - 12V

"Solar Kit 20Wc at a low price"

COMPOSITION

Solar Kit 20Wc 
Prewired, mounted in 10 minutes

-Solar panel: 20Wc -Controller  
charge: 10A 
-Battery: GEL 12V 26 Ah 
-Cable and connectors: 5m solar cable, 2m battery cable

Polycrystalline Solar Panel 12V 20Wc The reduced dimensions of this panel (472 x 350 x 18 mm) make it an ideal companion for nomadic applications. The frame is weatherproof aluminum. It gives the panel a particularly strong mechanical stability to guarantee ease of assembly and transport. Wind resistance: 130 km / h Maximum diameter of the hailstone: 25 mm Impact speed of the hailstone: 80 km / h Lightweight and reinforced aluminum frame

Battery GEL 12V 26Ah            

Advantages

Gel batteries are sealed batteries: no maintenance, no added distilled water. Enhanced safety compared to open lead batteries. 
A GEL battery can withstand 100% discharge and return to its rated capacity if the unloaded hold time is short. This series has a longer discharge time compared to other batteries. Its special plate design increases battery life and especially in warmer temperatures. A separator within the battery improves its performance. It also has a longer shelf life.

PWM regulator LS1024B 10A             

• Capacity: 10 amperes.
• Voltage: 12v or 24V
• This controller can accommodate up to 250 watts of solar panels (in a 24V system)
• Temperature compensation 
• 2 years warranty.
• Technology: PWM.
• Fully programmable if used with its display

5m of solar cable 2X4mm²  

To connect the panel to the charge controller We directly crimp the connectors in our workshop 

Thanks to the double sheath, these cables are extremely resistant to UV, heat, cold and bad weather. 
 2m cable 2X4mm² with battery lug 
To connect the charge controller to the battery